Product description
1060 aluminium foil at 0.12 mm in H18 is supplied as a continuous coil for fabricators whose part is usually cut from sheet, on 76 mm or 152 mm cores.
At some gauges the buying decision changes shape rather than thickness. A fabricator who needs a flat part at this section can buy sheet, cut it to length and accept offcuts, or buy a coil and feed a line without stopping. The metal is similar; the handling is not.
A coil removes the piece-by-piece cycle. There is no cut-to-length step at the front of the process, no stacking of blanks, and no leftover end piece that is too short to run. For a part that is produced continuously, that is worth more than a small difference in the price of the metal.
1060 is chosen here because the part usually does not need alloy strength. It needs a consistent surface, a predictable gauge and a coil that unwinds without fighting the line. H18 gives the web enough stiffness to run flat through a straightener and into a tool without draping.
At 0.12 mm the coil is still light enough to handle with ordinary lifting equipment, which matters because the advantage of coil form disappears if every changeover needs a crane. The core has to be sound enough to mount on a mandrel without ovalising, and the outer wrap has to protect the edge in transit.
What decides whether the coil works is flatness and gauge consistency. A coil with a set will not run flat however well the line is set up, and a web that is heavier on one side will track to that side through every pass.
Typical uses include continuously fed flat parts, liners and covers, and components that would otherwise be cut from sheet.
Minimum order quantity is 3 MT per size, and loading is from Qingdao, Tianjin or Shanghai. Send the part, the line it runs on and the coil weight your handling allows, and we will confirm the specification that fits.