Product description
1060 aluminium foil at 0.10 mm in H18 is stock for shims and spacers, where the gauge itself is the function rather than a route to some other property, supplied 1200 mm wide on 76 mm or 152 mm cores.
A shim is an unusual order. Nobody wants it for its strength, its finish or its forming behaviour. They want it because it is the thickness the assembly needs, and the whole part is that thickness. Get the gauge wrong and the part is wrong, however good everything else is.
That makes gauge consistency the specification. It is not enough that the coil averages the right figure; the web has to hold it across the width and along the length, because a shim cut from the thin side of a coil will not do the job the drawing asked for.
1060 is a sensible carrier for this work. It has no alloying addition to complicate the gauge, it cuts and punches cleanly, and in H18 it arrives flat enough to be stacked and counted without a straightening step in front of the press.
At 0.10 mm the stock sits in the middle of the heavy band. It is stiff enough to be handled as a part rather than as a film, and light enough that a stack of shims does not become a handling problem on the bench.
What matters on arrival is flatness, gauge consistency and a sound edge. A burr on the edge of a shim is a burr inside the assembly, and a coil with a set will produce shims that do not sit flat together.
Typical uses include shims, spacers, gap fillers and flat packing pieces.
Minimum order quantity is 3 MT per size, and loading is from Qingdao, Tianjin or Shanghai. Send the thickness the assembly needs and the tolerance it has to hold, and we will confirm the specification that fits.