Product description
1050 aluminium foil at 0.12 mm in O temper is stock for formed parts that will be seen, supplied 1200 mm wide on 76 mm or 152 mm cores.
Most technical parts are judged by what they do. A cosmetic part is judged by what it looks like after forming, and that is a harder brief. The paint has to sit on a face without a mark under it, and the mark usually comes from the tool rather than from the metal.
A soft alloy helps here in a way that is easy to overlook. 1050 in the annealed condition conforms to the punch instead of resisting it, so the face takes the shape of the tool rather than the memory of the blank. There is less springback to fight, and less of the local pick-up that leaves a scuff once the part is coated.
At 0.12 mm the part is still a foil part rather than a sheet part. It forms in a press built for foil, and it takes a coat evenly because the surface has not been worked hard enough to break up.
The gauges on either side of this one are used for different things: thinner stock in the same alloy tends to be bought for its thickness as a shim, and heavier stock for pressed shells where the section carries the load. This one sits where a formed face has to stay clean.
What matters on arrival is surface condition, flatness and gauge consistency. A mark that arrives on the coil cannot be polished out after coating, and a web with a set will form a face that reflects light unevenly.
Typical uses include cosmetic covers, visible formed panels, bezels and appearance-critical pressed parts.
Minimum order quantity is 3 MT per size, and loading is from Qingdao, Tianjin or Shanghai. Send the part, the face that will be seen and the coating it will take, and we will confirm the specification that fits.