Product description
1235 aluminium foil at 0.18 mm in O temper is heavy converter stock for laminated board and tray components, supplied 1200 mm wide on 76 mm or 152 mm cores.
A laminate is judged by what happens between the plies. The foil has to carry the adhesive without starving at the nip, stay flat enough to bond without trapped air, and hold its position while the assembly is pressed. At thin gauges those jobs are done with tension; at heavy gauges they are done with the metal.
0.18 mm is where the metal starts doing the work. There is enough section for the foil to stay flat under its own weight across the width of a laminating line, enough body for the bond to form without the web following every roller imperfection, and enough stiffness that the finished board does not telegraph the foil's own waviness through the face.
1235 is chosen because it laminates predictably. It bonds and prints the same way from one coil to the next, which is what a laminating line needs: the setting that worked on Monday should work on Friday.
The O temper keeps the web soft enough to conform to the substrate without needing heat to make it behave. What matters on arrival is flatness and gauge consistency, because a heavy web with a set will bond with an air path along one edge that only shows up after pressing.
Handling also changes at this gauge. A coil this heavy needs lifting equipment and a mandrel that will take the weight without marking the bore, and the edge has to be protected because a damaged edge on a heavy coil becomes a crease across the full width.
Typical uses include heavy laminated board, tray components, semi-rigid pack parts and barrier plies in thick structures.
Minimum order quantity is 3 MT per size, and loading is from Qingdao, Tianjin or Shanghai. Send the laminate structure, the press route and the width you run, and we will confirm the specification that fits.