Product description
3003 aluminium foil at 0.18 mm in H18 is heavy container stock for large drawn formats, supplied 1200 mm wide on 76 mm or 152 mm cores.
A large container fails in a different way from a small one. A small tray can be forgiven a soft wall because the pack is handled as a unit. A large one is picked up by an edge, stacked under other packs and levered out of a carton, and every one of those actions puts the wall in bending.
3003 carries manganese, so the wall has strength that does not depend on the draw. That matters in a large format because the drawn wall is the thinnest part of the pack and the part that takes the handling. The alloy supplies the resistance the geometry cannot.
0.18 mm gives that wall a margin without going to the ceiling of the range. It is heavy enough that a large format keeps its section after drawing, and light enough that the blank still forms without the tooling needed for the thickest gauges.
H18 puts the work hardening in the coil before the press sees it. The wall therefore starts stiff and stays stiff, which suits a container that is filled, closed and stacked rather than formed again downstream. A softer temper would draw more easily but would give the stack a wall that yields under load.
What matters on arrival is gauge consistency and flatness. A heavy web with a set will not be pulled flat by tension, and a container drawn from an uneven blank has one wall thinner than the other before anything else goes wrong.
Typical uses include large drawn containers, catering trays, heavy lids and semi-rigid pack components.
Minimum order quantity is 3 MT per size, and loading is from Qingdao, Tianjin or Shanghai. Send the container format, the fill weight and the stack the pack has to survive, and we will confirm the specification that fits.