Product description
8011 aluminium foil at 0.06 mm in O temper is lid and closure stock, supplied 1200 mm wide on 76 mm or 152 mm cores.
A lid is a small part with a hard job. It has to be curled round a rim without splitting, hold that curl through filling and closing, and open cleanly when the customer pulls. On thin stock the curl is where it fails first, because there is not enough metal in the section to form a full turn.
0.06 mm is the heavier end of the lid band. There is enough metal to complete a curl and to leave material at the score line, so the lid tears where it is meant to rather than where it happens to be thin.
8011 is chosen for this work because it forms and lacquers predictably. It is not the alloy for the most demanding formed containers, and it is not asked to be; it is asked to behave the same way on every coil, so the closing head does not have to be reset between deliveries.
The O temper keeps the stock soft enough to curl without cracking. What matters on arrival is that the coil is free of creases and the gauge is even across the width, because a lid blanked from an uneven web will curl on one side before the other.
Typical uses include lid stock, closure discs, capsule shells and small container components.
Minimum order quantity is 3 MT per size, and loading is from Qingdao, Tianjin or Shanghai. Send the closure type, the lacquer and the width you run, and we will confirm the specification that fits.