Product description
8079 aluminium foil at 0.12 mm in O temper is barrier stock for cell housing layers in large formats, supplied 1200 mm wide on 76 mm or 152 mm cores.
A housing layer has one job that cannot be compromised: it has to keep moisture away from what is inside for the life of the assembly. Everything else about the part can be negotiated. The thickness, the width, the coil weight and the packing can all be set to suit the line. The barrier cannot.
8079 is used for barrier work because of its grain structure. The metal deforms evenly, so a layer that is formed or folded into a housing does not end up with one thin place where moisture can pass. At 0.12 mm there is enough section to survive that forming and to keep a margin at the folds.
The gauge also decides how the layer behaves on the line. A heavier web stays flat across a wide format, resists wrinkling as it is fed, and holds its position while it is bonded. That flatness is what keeps the barrier continuous across the full width rather than only in the middle.
The O temper leaves the material soft enough to conform to the housing shape without cracking at a fold. A harder temper would hold a flatter face but would resist the folds where the layer has to turn a corner.
What matters on arrival is gauge consistency, flatness and a sound edge. A web that is uneven across the width will be thin on one side after forming, and a burr at the edge becomes a crack once the layer is folded.
Typical uses include barrier layers in large-format housings, folded barrier components and barrier plies in multi-layer structures.
Minimum order quantity is 3 MT per size, and loading is from Qingdao, Tianjin or Shanghai. Send the housing format, the fold pattern and the width you run, and we will confirm the specification that fits.