Product description
8079 aluminium foil at 0.07 mm in O temper is barrier stock for cell housing layers, supplied 1200 mm wide on 76 mm or 152 mm cores.
A housing layer has one non-negotiable job: it has to keep moisture away from what is inside for the life of the assembly. Everything else about the part can be negotiated, but the barrier cannot, and the barrier is decided by how sound the metal stays after it has been formed and folded.
8079 is used for this work because of its grain structure. The metal deforms evenly, so a layer that is folded into a housing does not end up with one thin place. Even deformation is what keeps the barrier continuous around a corner.
At 0.07 mm the layer is thin enough to fold into the housing geometry and thick enough to keep a margin where the fold takes the most strain. It also stays flat across a wide web, which is what keeps the barrier continuous across the full width rather than only in the middle.
The O temper leaves the material soft enough to conform to the housing shape without cracking at the fold. A harder temper would hold a flatter face but resist the folds where the layer has to turn a corner.
What matters on arrival is gauge consistency, flatness and a sound edge. A web that is uneven across the width will be thin on one side after folding, and a burr at the edge becomes a crack once the layer is bent.
Typical uses include barrier layers in cell housings, folded barrier components and barrier plies in multi-layer structures.
Minimum order quantity is 3 MT per size, and loading is from Qingdao, Tianjin or Shanghai. Send the housing geometry, the fold pattern and the width you run, and we will confirm the specification that fits.