Product description
1050 aluminium foil at 0.18 mm in O temper is heavy stock for pressed and deep-drawn shells, supplied 1200 mm wide on 76 mm or 152 mm cores.
When a part is pressed rather than folded, the material has to do something different. It has to move. A section that is too hard will resist the tool, thin out where the punch stretches it and tear at the corner where the draw is deepest. The alloy that survives that is the one with the least in it to resist.
1050 is the softest grade in the range for exactly this reason. There is almost nothing in the metal to work against the tool, so the shape is set by the die rather than fought by the sheet. That is also its limitation: it will not carry a load the way a manganese alloy will, so it belongs in shells, covers and housings rather than in structural parts.
The O temper is what makes a gauge this heavy usable in a press. At 0.18 mm there is enough metal to form a real wall, and annealed stock lets that metal flow into the draw instead of thinning at the corner. A harder temper at the same gauge would need less press force but would thin more where the part needs wall.
What matters on arrival is gauge consistency and flatness. A web that is heavier on one side draws unevenly and one side of the shell ends up thinner before the tool has done anything wrong. The coil is also heavy enough at this gauge that it needs lifting equipment and a proper mounting at the press.
Typical uses include pressed covers, drawn shells, housings and formed technical parts.
Minimum order quantity is 3 MT per size, and loading is from Qingdao, Tianjin or Shanghai. Send the drawn shape, the depth and the wall the part has to hold, and we will confirm the specification that fits.