Product description
1060 aluminium foil at 0.18 mm in H18 is the heavy end of the plain alloy range, supplied 1200 mm wide on 76 mm or 152 mm cores.
A gauge ladder is only useful if it goes where the buyer needs to go. For a long time this alloy stopped well short of the heavier technical gauges, and anyone wanting a plain, unalloyed foil at the stiff end had to accept a different alloy with a different set of behaviours. That is a nuisance when the rest of the part was designed around 1060.
1060 has almost no alloying addition to account for, which is why it is chosen where the job is straightforward and repeatable rather than demanding. Nothing in the metal needs to be compensated for in forming, coating or joining. What the part needs is flat metal at a known gauge, and that is what this grade gives.
At 0.18 mm the web is heavy enough to be handled as a part rather than as a wrapping. It will not drape, and it will not be pulled flat by tension if it arrives with a set, so flatness has to be in the coil. A coil at this gauge is also heavy enough that lifting and unwinding need equipment rather than hands.
H18 puts the work hardening into the coil, so the finished part does not depend on the press to develop its stiffness. That suits flat components with simple bends, where the shape is set once and then left alone.
Typical uses include flat technical parts, simple bent components, gaskets and general industrial panels.
Minimum order quantity is 3 MT per size, and loading is from Qingdao, Tianjin or Shanghai. Send the part drawing and the flatness it has to hold, and we will confirm the specification that fits.