Product description
8021 aluminium foil at 0.03 mm in O temper is supplied slit to 450 mm for lid and pouch converting, on 76 mm or 152 mm cores.
Buying a coil at the width the machine runs is a decision about where the slitting happens. A converter who slits in house carries the knife set-up, the trim, the edge quality and the downtime. A converter who buys the width already slit trades all of that for a coil that may only fit one job.
450 mm suits lid and pouch lines that run a fixed web width. There is no trim to account for on the line, no re-threading between knife changes, and the operator works with a coil that matches the machine rather than a master roll that has to be reduced first.
8021 is chosen for this work because it forms and seals predictably at thin gauges. At 0.03 mm the web is a lid ply rather than a wall: it has to carry a lacquer, take a print, hold a seal and stay continuous through the converting line.
The O temper keeps it soft enough to follow the sealing tool and to negotiate the rollers without creasing. What matters on arrival is the edge. A slit coil at this width has two cut edges, and a burr on either one becomes a tear on the line or a visible flaw in the finished lid.
Narrow coils also change handling. There is less web to spread a load, so the coil is more easily damaged at the edge, and the core has to be sound enough to mount without ovalising.
Typical uses include lid stock, pouch plies, sachet lids and narrow-web barrier laminates.
Minimum order quantity is 3 MT per size, and loading is from Qingdao, Tianjin or Shanghai. Send the machine width, the core you mount and the lacquer or print the web has to take, and we will confirm the specification that fits.