Product description
1060 aluminium foil at 0.2 mm in H18 sits at the top of the published foil range, supplied 1200 mm wide on 76 mm or 152 mm cores.
Every product range has a boundary, and buyers find it by asking for one step more. At 0.2 mm the coil is still wound and still supplied as foil, but the handling, the tooling and the tolerances have more in common with thin sheet than with the wrapping gauges the range was built around.
1060 is the plainest grade in the range, which is why it is chosen at the boundary. There is no alloying addition to compensate for in cutting, bending or joining, so the part behaves the way the drawing assumes. What the buyer is really specifying at this gauge is flatness and consistent thickness, not strength.
H18 puts the work hardening into the coil so the flat part stays flat after cutting. That suits blanks, panels and spacers that are cut and used rather than formed, and it is the wrong choice for anything that has to be bent sharply.
Two practical points decide the order. First, a coil at this gauge is heavy enough that it needs lifting equipment and a mounting arrangement at the machine. Second, a web this stiff will not be pulled flat by tension, so a coil with a set will produce parts with a twist that no downstream adjustment removes.
Typical uses include flat blanks, panels, spacers and general industrial sheet-replacement parts.
Minimum order quantity is 3 MT per size, and loading is from Qingdao, Tianjin or Shanghai. Send the blank size, the flatness the part has to hold and how it will be cut, and we will confirm the specification that fits.