Product description
1235 aluminium foil at 0.08 mm in O temper is facing and lamination stock with more body than the thin converter gauges, supplied 1200 mm wide on 76 mm or 152 mm cores.
A foil ply inside a laminate has one job that is easy to overlook: it has to arrive at the bonding nip in one piece. A thin web that creases on a roller, or that pulls tight enough to wrinkle between two driven rollers, will be laminated with that crease in it. The barrier is then compromised before the laminate has been used for anything.
0.08 mm changes that balance. There is enough metal for the web to resist a crease and to run at a tension that does not require the line to be rethreaded every hour, and still little enough that the ply stays flexible in the finished laminate.
1235 is chosen for this band because it laminates and bonds predictably. It is not the alloy for a deep draw, and it is not asked to be. It is asked to present a clean, even surface to an adhesive or a coating, coil after coil, so that the same line settings keep working.
The O temper keeps the web soft enough to follow the substrate it is bonded to, which matters when the other ply is a film or a foam that moves differently. What matters on arrival is that the coil is free of creases and that the gauge is even across the width, because an uneven web bonds unevenly and shows it later as a ripple.
Typical uses include facing plies, lamination stock, tape backing and insulated panel skins.
Minimum order quantity is 3 MT per size, and loading is from Qingdao, Tianjin or Shanghai. Send the laminate structure and the line speed you run, and we will confirm the specification that fits.