Spec agreed before price

Shunchengtian Aluminium Aluminium Foil Manufacturer & Exporter Get a quote

What Should an Aluminium Foil Purchase Specification Actually Contain?

What Should an Aluminium Foil Purchase Specification Actually Contain?

The nine fields a foil specification must carry, and why each missing line becomes a dispute.

A coil arrives matching every line on the order and is still rejected at goods-in. The argument that follows is rarely about metal; it is about a line nobody wrote.

A workable specification carries alloy, temper, gauge with its tolerance band, width, core, winding direction, surface, packing and inspection wording, each line written so someone can measure or check it on arrival.

Leaving one field out does not make a document shorter. It moves the decision to whoever opens the pack, usually without the information needed to make it.

Which Fields Must a Foil Specification Carry Before Anything Else?

Nine lines do most of the work, and missing one of them sets the rest of the document arguing with itself.

Alloy, temper, gauge with its band, width, core, winding direction, surface, packing and inspection, written as one controlled list, describe a coil closely enough for anyone to check it.

Dive deeper

The list is short because foil is a simple product with few variables, and every variable is a decision somebody has to make. Alloy decides how the metal behaves under forming, joining and heat; 1050, 1060, 1100, 1235, 3003, 3004, 8011, 8021 and 8079 are not interchangeable habits but different sets of behaviour. Temper decides how the sheet answers a fold, and O, H14, H16, H18, H22 and H24 sit at different points on that curve. Gauge decides how much metal is in the pack, width whether the web fits the machine, core whether the coil mounts at all. Winding decides which face meets the first roller, surface what the customer sees, packing what survives the journey.

Written separately, each of these is easy to answer. Written together in one document, they become a specification, and a specification is only useful when it is the single place where answers live. Split the fields between a drawing, an email thread and a purchase order and the coil is still produced against all three, but nobody can say afterwards which one governed. Consolidating the list costs one page. For background on how the metal behaves, this overview of aluminium foil is a fair starting point, and the aluminium foil roll and sheet range shows the forms these fields describe.

Aluminium foil roll with its core and outer wrap visible

Why Is 0.06 mm on Its Own Not a Specification?

A number names a target. It says nothing about how close a coil has to sit to that target, or who decides when it is close enough.

Without a band on either side, 0.06 mm reads as an absolute. A mill cannot hit an absolute, so the buyer has effectively reserved the right to reject any coil and the supplier the right to defend any coil.

Dive deeper

Every gauge on a foil order is a target with a zone around it, and the zone is the part of the sentence that carries the agreement. A bare number leaves the width of that zone to whoever is measuring. On arrival, the buyer's instrument reads something slightly above or below the nominal, as it always will, and the document offers no way to say whether that reading is acceptable. The coil is then judged by mood rather than by wording, and the supplier has no way of knowing in advance which mood it will meet.

If the band is unwritten, the supplier is pushed towards the middle of the range to stay safe, and that caution comes back through the commercial terms. If the band is written but the measuring position is not, two honest people can produce two honest verdicts from one coil. If both are written but the state of the coil is not, a cold pack measured straight off a truck will read differently from the same pack after a night indoors. Writing the band turns a question of opinion into a question of record. What that zone does to yield is set out in how thickness tolerance affects foil yield, and wider market context sits in the published work of the European aluminium industry.

Who Owns Which Decision: Buyer, Mill or Converter?

Three parties touch one coil before it is used. Each owns a set of decisions, and the document is the only place those sets become visible.

The buyer owns the requirement, the mill owns what the metal can be produced to, and the converter owns what happens after slitting, rewinding or cutting. A field with no named owner is a field waiting to be argued.

Dive deeper

The buyer's side of the document is the end use: what the part has to do, which face is seen, how the web is fed, whether the coil is mounted on a shaft or dropped into a cradle, how long the pack sits before use, and what it must survive between the loading bay and the machine. None of that can be inferred from an alloy number, and none of it belongs to the mill. When a buyer writes only alloy, temper and gauge, every other decision is delegated to whoever quotes the job, and that party will choose what is convenient rather than what is needed.

The mill's side is the produced condition: alloy, temper, gauge with its band, width as delivered on the master coil, surface finish as rolled, and the mill's own winding and packing practice. A mill can usually hold a band it has agreed to, and can rarely hold one it has never seen. The converter owns everything downstream: slit width and its band, core diameter and material, rewind direction, edge condition, joins and packing. On a plain heavy gauge item such as 1060 aluminium foil at 0.18 mm, the split is easy to see, because the mill supplies a wide coil and the converter decides the width the press will run.

Slit aluminium foil rolls of two widths beside each other

How Should a Tolerance Band Be Written So It Can Be Measured on Arrival?

A band that cannot be measured is a band that will be interpreted, and interpretation always favours the person holding the coil.

Write the nominal, the band above and below it, the position in the web where it applies, and the condition of the coil when it is checked. Then one number means one thing at both ends.

Dive deeper

The wording has four parts and each one closes a different gap. First the nominal, stated as a single figure rather than a range, because a range cannot be measured against itself. Second the band, written on both sides of the nominal so nobody has to guess whether the tolerance is one-sided. Third the position, naming where in the web the band applies and whether the slit edge sits inside or outside it, since edge regions behave differently from the body of the web. Fourth the condition, describing the state of the coil when it is measured: settled after transport, unwrapped in a dry place, checked on a clean surface rather than over a crease.

Then name the instrument in functional terms, so both parties use equipment of comparable resolution without appealing to a document neither of them keeps. Say who measures, at which stage, and where the reading is recorded. A band written this way can be checked by a warehouse hand with a gauge and a clipboard, and the answer will be the same on a second shift. It also survives a change of personnel, which a verbal agreement does not. On a lighter technical item such as 3004 aluminium foil at 0.15 mm, the same four parts apply unchanged; only the band differs.

How Should Inspection and Rejection Clauses Read?

Most rejection clauses are one sentence long, written by someone imagining a perfect claim and a cooperative supplier.

A usable clause sets out who inspects, when, what evidence is kept, how notice is given, which remedies are open and who carries the cost of return. Order matters as much as content.

Dive deeper

Start with the sequence, because a clause that opens with the remedy has already skipped the part that decides whether a remedy is due. The pack is identified, the outer wrap is examined before it is opened, the coil is checked against the document, a finding is recorded with the coil identification and the position on the web, notice is given in writing within a period both sides agreed, and only then is a remedy discussed. Each step exists to stop a later argument about what was seen and when.

Then define the finding in the language of the document rather than the language of disappointment. A clause saying material must be free from defects invites a debate about defects; a clause saying the coil will be checked against the listed fields, and that a departure from any listed field is a finding, gives both sides a reference. Keep a retained piece from the affected area, photograph the pack before unwrapping further, and record where on the coil the finding sits, because a claim that cannot be located cannot be assessed. List remedies as options rather than outcomes: replacement, rework where the material allows it, or a commercial adjustment agreed in writing, with freight and ownership of the disputed coil stated. Published material from the aluminium industry association covers how semi-finished product is normally handled.

Aluminium foil web running on a rewind stand

Which Packing and Marking Fields Do People Forget?

Packing is the last field written and the first one tried. Transit damage almost always traces back to a line that never made it onto the order.

Eye orientation, wrap, desiccant, edge protection, pallet type, strapping and outward-facing marks all belong in the document, together with the coil identification that ties a pack back to its line.

Dive deeper

Eye orientation is the classic omission. A coil that stands on end and a coil that lies on its side need different handling equipment, different cradle arrangements and different unpacking sequences, and the difference stays invisible until a pack is opened at the wrong end of a warehouse. Write whether the bore faces upward or sideways, and write it as a requirement rather than a preference, because a preference is what a loading crew negotiates with.

Around that, the forgotten fields tend to be the ones that cost little and protect a lot: a moisture barrier wrap that is sealed rather than merely folded, a desiccant sachet whose presence is stated rather than assumed, edge protection on the end faces, a pallet described by type rather than by the word pallet, strapping described by position, corner boards where packs are stacked. Two further fields are routinely skipped: whether mixed sizes may share a pallet, and which language the marks are written in. Marking is the other half. Coil identification, alloy, temper, gauge, width and core should be readable on the outside without unwrapping, and the same identification should travel with the shipping documents, or the warehouse ends up with two names for one coil. Converter practice on packing is discussed in material published by the foil converting industry.

What Belongs in the Winding, Core and Surface Lines?

Winding, core and surface are the three lines buyers treat as obvious, which is exactly why they are the three that get assumed differently.

State which face runs outward, the core diameter and material, whether joins are allowed and how they are marked, and describe the surface in words rather than a single adjective.

Dive deeper

Winding direction sounds like a detail until a converter loads a coil the wrong way round and the treated face runs against the idler rollers. The useful wording names which face is outward, whether the web is wound with the bright side in or out, and how the tail is secured. Core is the briefest line in the document and the one that stops a line: diameter is normally written as 76 mm or 152 mm, and the material matters, since a cardboard core and a steel core behave differently when a heavy coil is mounted and pulled. Say whether the core may protrude or must sit flush with the end faces.

Surface should be described rather than named with a single word, because one adjective can cover a wide family of finishes. Say whether the finish is as rolled or one side bright, whether the texture is uniform, and which visual conditions count as a finding: stains, streaks, handling marks, or a patchy appearance across the width. Avoid leaning on a single technical term, which everyone reads differently; describe what a person would see and where. State whether joins are permitted at all, whether they are marked, and how they are marked, because an unmarked join stops a printing line and a marked one merely interrupts it.

How Does a Short Specification Fail in Practice?

Short specifications do not fail loudly. They fail in a warehouse, weeks later, in a conversation between two people who both believe they are right.

A document missing fields shifts every open question to the moment of delivery, where answers are expensive. One gap becomes a claim, the claim a credit, the credit a habit.

Dive deeper

The usual pattern runs like this. An order is placed with alloy, temper and a nominal gauge, plus a width and a note that packing should suit sea freight. The coil is produced, shipped and opened. Someone measures near the edge, finds a reading away from the nominal, and complains. The supplier measures at the centre, finds a reading closer to the nominal, and answers politely that the material is within the usual range. Neither party is lying, and neither has a document to point at.

What follows is rarely a clean rejection. It is a negotiation under time pressure, with a production line waiting, and it usually ends in a partial credit that satisfies nobody: the buyer learns to inspect harder, the supplier to hedge more, and the next order is written in the same three lines. The repair is structural: pull every field into one controlled document, give it a revision number and a change log, name who may authorise a change, and send the same revision to mill and converter. Scoring offers against that page is described in comparing foil quotations like for like, and it only works once the page exists.

A specification is a short document that decides arguments before they start. Write every field, write the band, write who checks it, and keep one controlled copy.

← All articles