Product description
1100 aluminium foil at 0.18 mm in H14 is a heavy gauge for parts that are roll-formed or bent rather than drawn, supplied 1200 mm wide on 76 mm or 152 mm cores.
At the heavy end of the foil range the temper stops being a detail and becomes the decision. A part that is drawn wants soft stock that follows a tool. A part that is roll-formed or bent wants the opposite balance: enough stiffness to keep its section once formed, and enough ductility left that the bend does not crack.
H14 sits in that window. The work hardening is partly in the coil, so the section holds its shape after the rolls, and there is still elongation left for the bend radius the part needs. H18 would hold a flatter section and crack sooner at a tight bend.
1100 carries enough impurity to work-harden at a useful rate, which is why it responds predictably to roll forming. The gauge does the rest: at 0.18 mm the section is stiff enough to be handled and stacked without support, and the edge is substantial enough that a burr becomes a visible defect rather than a theoretical one.
Flatness is the property that decides the run. A coil with a set will form a section with a twist that no amount of roll adjustment removes, because the twist is in the material rather than in the tool.
Typical uses include roll-formed sections, bent connectors, heat-transfer fins and general technical parts.
Minimum order quantity is 3 MT per size, and loading is from Qingdao, Tianjin or Shanghai. Send the section drawing, the bend radii and the flatness the part has to hold, and we will confirm the specification that fits.