Product description
3003 aluminium foil at 0.12 mm in H18 is technical stock for parts that must be formed and then hold their shape, supplied 1200 mm wide on 76 mm or 152 mm cores.
There is a point in a part's design where the drawing stops being about covering something and starts being about carrying something. Once that happens, the material choice changes: a soft grade still forms beautifully, but the finished part will flex under load, and no amount of tooling will fix that.
3003 carries manganese, which is what gives it strength without taking away its ability to be worked. In H18 the strength is already in the coil, so the finished part does not depend on the forming operation to develop it. That is the practical difference between specifying H18 rather than O and relying on the press to harden the part.
At 0.12 mm the material still forms, but it forms differently. Springback is larger, so the tool has to be cut past the finished shape rather than to it. The radius has to be generous enough not to start a crack, and the blank has to be flat in the coil because a web this heavy will not be flattened by tension.
The cut edge is part of the specification rather than a detail. On a formed technical part the edge is often handled, sometimes visible, and always a place where a burr becomes a crack. A clean shear is worth asking for explicitly.
Typical uses include formed technical parts, brackets and supports, and components that must stay flat and stiff after forming.
Minimum order quantity is 3 MT per size, and loading is from Qingdao, Tianjin or Shanghai. Send the drawing, the forming method and the load the part must carry, and we will confirm the specification that fits.