Product description
3003 aluminium foil at 0.2 mm in H18 sits at the top of the foil range, where the material still coils but no longer behaves like a wrap, and is supplied 1200 mm wide on 76 mm or 152 mm cores.
There is a gauge beyond which a buyer stops asking what the foil will cover and starts asking what it will carry. At that point the questions change: not how it drapes, but whether it stays flat, whether the edge is sound, and whether the part can be handled without bending.
3003 carries manganese, so it has strength without losing its ability to be worked. In H18 that strength is already in the coil, and the finished part does not depend on the forming operation to develop it.
At this gauge the practical issues are handling and flatness. A coil this heavy is not something one person lifts, and a web this stiff will not be pulled flat by tension if it arrives with a set. Flatness has to be in the coil, not in the machine.
The cut edge matters more here than at thin gauges. On a part this stiff the edge is often handled and sometimes visible, and a burr is a place where a crack starts. A clean shear is worth asking for explicitly.
Typical uses include flat stiff parts, gaskets, duct connectors and reinforcing plates.
Minimum order quantity is 3 MT per size, and loading is from Qingdao, Tianjin or Shanghai. Send the drawing and the flatness the part has to hold, and we will confirm the specification that fits.