Product description
3004 aluminium foil at 0.15 mm in H22 is a mid-heavy gauge for parts that are formed and then have to stay formed, supplied 1200 mm wide on 76 mm or 152 mm cores.
Two failures sit on either side of this choice. Use a temper that is too hard and the part cracks at the bend, or springs back further than the tool was built to allow. Use one that is too soft and the part forms easily, then creeps out of shape in service. The gauge makes both failures worse, because a heavier web takes more work to bend and remembers less of the bend.
3004 carries manganese, so it has strength that does not have to come from cold work alone. H22 leaves some of the work hardening available for the forming operation, which is why it is specified where the part has to be shaped rather than merely cut.
At 0.15 mm there is enough metal for a genuine bend radius and for the part to resist handling, and still little enough that the tool has to be right. Springback is the number that decides whether the first trial produces a part or a discussion.
Flatness and edge condition carry through to the finished part. A coil with a set will form parts with a twist, and a burred edge is where a bend line starts to run.
Typical uses include formed brackets, duct connectors, covers, gaskets and reinforcing plates.
Minimum order quantity is 3 MT per size, and loading is from Qingdao, Tianjin or Shanghai. Send the drawing, the bend radii and the tolerance the part has to hold, and we will confirm the specification that fits.