Product description
8021 aluminium foil at 0.03 mm in O temper, slit to 800 mm, is barrier stock for lidding lines that run a narrow web, supplied on 76 mm or 152 mm cores.
The width of a coil is not a detail. It decides which machine the coil can go on, how much trim comes off at the front of the line, and how often somebody has to stop and change a roll. A converter with a narrow lidding line does not want a master coil and a slitter in the same building.
Buying the coil already slit to 800 mm removes that step. The coil goes straight onto the unwind, the line runs at the width it was built for, and the trim that would have been generated in-house is never generated at all.
8021 suits the work because it is a barrier alloy that forms and bonds predictably. At 0.03 mm the web is thin enough to seal through a lacquer at normal line settings, and consistent enough that the same setting holds across the run.
Narrow webs are less forgiving in one respect: the edge is a larger share of the width. A burr or a wave on a narrow coil will affect a bigger proportion of the web than the same defect on a wide one, so the slit edge has to be clean and the winding has to be straight.
What matters on arrival is width accuracy, edge quality and winding. A coil that is a few millimetres off will not track on a line set for a fixed width, and a coil that has wound unevenly will wander as it pays off.
Typical uses include lidding stock for narrow-web lines, pouch and sachet components, and barrier plies in narrow laminates.
Minimum order quantity is 3 MT per size, and loading is from Qingdao, Tianjin or Shanghai. Send the line width, the lacquer and the seal you run, and we will confirm the specification that fits.