Product description
8021 aluminium foil at 0.12 mm in O temper is heavy barrier stock for cold-formed bases, supplied 1200 mm wide on 76 mm or 152 mm cores.
A formed barrier part has two jobs at once. It has to be pushed into a cavity deep enough to hold the product, and it has to still be a barrier where the forming stretched it. Those two jobs pull in opposite directions, and the answer is usually found in the alloy and the wall rather than in the tool.
8021 is chosen for barrier work because of how it forms. The grain is fine enough that the wall thins more evenly as the tool stretches it, so a deep cavity does not end with one thin place and one thick place. That evenness is what keeps the barrier intact through the draw.
0.12 mm is the heavy end of that work. There is enough section to form a cavity with real depth and to keep a margin of metal at the corner where the draw is most severe. Thinner stock forms more easily but leaves less metal exactly where the part is most likely to be damaged later.
The O temper is what makes a gauge this heavy formable. Annealed stock flows into the cavity instead of resisting the punch, and the wall follows the tool rather than fighting it. A harder temper would hold a flatter base but thin more at the transition.
What matters on arrival is gauge consistency, flatness and a sound edge. A heavier web that arrives with a set will form unevenly, and a burr on the edge becomes a crack once the material is drawn.
Typical uses include cold-formed barrier bases, deep barrier cavities and heavy barrier components.
Minimum order quantity is 3 MT per size, and loading is from Qingdao, Tianjin or Shanghai. Send the cavity depth, the forming route and the width you run, and we will confirm the specification that fits.